• Homepage>>Comparable Coin Selector
    New productsProducts series


    .Rating voltage: DC+12V with 20percent discrepancy

    .Stand by Current: 50mA-55mA .

    Operating Current: 310mA-340mA .

    Accepted coin diameter: 18mm-32mm

    .Accepted coin thickness: 1.2mm-3.0mm .

    Size per unit: W 15.3 x D6.5 x H13(mm)

    .Net weight: 0.33kgs .Packing: 50 pcs/case

    .Per case: 16.6 kgs

    .Size per case: W780 x D360 x H278(mm)

    Detailed Products

    1. Firstly remove the yellow plastic token& replace the coin to the clamp.
    2. If use RMB 1. please switch (SW3) to RMB Only
    3.Choose N.O(Normal Open) or N.C(Normal Close) in coordination with the machine specification. (Normally Mario Machines should be N.C, Gaming Machines be N.O )
    4. Switch to “SW2”:
    Fast: 25ms/short pulse signal (apply to Mario Machine)
    Medium: 50ms/medium pulse signal (apply to different machine)
    Slow: 100ms/long pulse signal (apply to entertainment machine)
    Notice: If coin-eating , please adjust the switch.
    5. VR turning for sensitivity of coin acceptance: turn clockwise (+)for strict coin selecting: anti-clockwise(-)for slack.
    6. Lines guide of connector:
    1)Gray line
    Red line DC+12V
    2)White line COIN Signal
    3)Black line Ground
    4)Gray line

    program comparable coin slot with steps5000100F MANUAL